Syskonnect SK-9E21D Uživatelský manuál Strana 28
- Strana / 46
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
30 3 Installation of the Driver Software
11. To copy the driver to the server, select YES.
If an older version of a SysKonnect driver is installed on the system, the messages “Save
existing file SYS:SYSTEM\<driver name.LAN?” and “Save existing file
SYS:SYSTEM\<driver name>.LDI?” are displayed.
12. To continue, select the desired options (Y
ES or NO).
The menu “Board SK-98NW_1 (Driver <driver name>) Actions” is displayed.
13. Select S
ELECT MODIFY DRIVER PARAMETERS/PROTOCOLS.
14. Configure the protocols to be used.
15. Configure the parameters, e.g. “slot number”.
16. After the parameters have been configured, select S
AVE PARAMETERS AND LOAD DRIVER.
The driver is loaded.
Once the driver has been installed, the adapter parameters or bindings can be changed
in the autoexec.ncf file using the “Install” tool.
For more information, refer to the corresponding readme file.
Installation on Novell NetWare 5 and 6
The installation procedure for NetWare 5 and 6 is identical.
To install the network driver on Novell NetWare 5 or 6, proceed as follows:
1. After you have installed the adapter in your computer (for details, see chapter 1 "Installa-
tion of the Network Adapter"), boot NetWare 5 or 6.
NetWare detects the new adapter and tries to install a driver.
2. To get a list of available drivers, press <Enter>.
The menu “Select a driver” is displayed.
3. To install an unlisted driver, press <Insert> (the SysKonnect driver is not listed).
4. To specify the path to the driver, press <F3>.
The window “Specify a directory path” is displayed.
5. Type the path to the driver.
If you are installing from CD-ROM, the menu “Select an action” is displayed. Here, select
C
ONTINUE AND ACCESS THE CD-ROM.
The menu “Select a driver to install” is displayed.
6. Select the driver for your network adapter.
The message “Do you want to copy driver <driver name>.LAN?” is dis-
played.
7. To copy the driver to the server, select Y
ES.
If an older version of a SysKonnect driver is installed on the system, the messages “Save
existing file SYS:SYSTEM\<driver name.LAN?” and “Save existing file
SYS:SYSTEM\<driver name>.LDI?” are displayed.
8. To continue, select the desired options (Y
ES or NO).
The menu “Board SK-98NW_1 (Driver <driver name>) Actions” is displayed.
9. Select S
ELECT MODIFY DRIVER PARAMETERS/PROTOCOLS.
10. Configure the protocols to be used.
11. Configure the parameters, e.g. “slot number”.
12. After the parameters have been configured, select S
AVE PARAMETERS AND LOAD DRIVER.
The driver is loaded.
Once the driver has been installed, the adapter parameters or bindings can be changed
in the autoexec.ncf file using the “Nwconfig” tool.
For more information, refer to the corresponding readme file.
- SysKonnect 1
- SysKonnect SK-9E21D 3
- 10/100/1000Base-T Adapter 3
- PCI Express 3
- Conventions 5
- 6 Conventions 6
- Table of Contents 7
- 8 Table of Contents 8
- Table of Figures 9
- 12 Table of Figures 10
- Safety Precautions 11
- 14 Safety Precautions 12
- Transmission Distances 15
- Connection to the Network 15
- Windows NT 4.0 18
- Windows 98 Second Edition 19
- Windows Millennium Edition 19
- Windows 2000 20
- Windows 23 21
- Linux 25 23
- Sun Solaris (x86) 25
- ROWSE > SOFTWARE 26
- DIT > ADD 26
- Novell NetWare 27
- 4Features 29
- Operating System Support 30
- High Performance 30
- Alert Standard Format (ASF) 31
- PXE / RPL Support 31
- Reliability 32
- Virtual LAN (VLAN) support 33
- Virtual Cable Tester™ (VCT) 34
- 5 Troubleshooting 35
- LED Displays 36
- 6 Important Information 37
- 40 6 Important Information 38
- Technical Specifications 39
- 42 6 Important Information 40
- Information 41
- Weitere Beschränkungen 44
- Hardware 44
- Please visit: 46
(66 stránky)
Komentáře k této Příručce